How a self-service car wash works in winter

To understand the principle of operation self-service car washes In winter, it is important to find out what requirements the complex must meet in order to function optimally at negative temperatures. The choice of building materials, equipment and compliance with the rules of construction technology determine the productivity and profitability of the complex in winter.

All systems and equipment that may be exposed to freezing should be installed below the ground freezing level. When constructing a car wash, it is important to use materials that do not deform due to temperature fluctuations. It is also necessary to equip the Antifrost system and install underfloor heating at each car wash station.

How to properly arrange a self-service car wash for efficient operation in winter

To ensure the efficient operation of a self-service car wash in winter, the following aspects must be taken into account during design and construction:

1. Installation of water supply systems, dosing systems in the technical room, wastewater treatment below the ground freezing level.
2. Creating comfortable conditions for self-service car wash staff in winter.
3. Installation of underfloor heating at each washing station.
4. Installation of the Antifrost system to prevent freezing of liquids in low and high pressure pipelines.
5. Designing and installing efficient wastewater treatment systems, where the use of septic tanks may be the best solution.
6. Ensuring a continuous supply of effective car chemicals to the self-service car wash in winter, controlling the concentration and heating it.

Water supply, dosing and wastewater treatment systems

To understand how a self-service car wash works in winter, let’s look at the rules for installing a water supply system. When designing and installing a water supply system, Wash Service specialists adhere to the following principles:

1. The water supply system is designed so that the pipes do not come into contact with reinforced concrete structures, as the probability of soil freezing near grillage, foundations, beams and supports is much higher.
2. Select the optimal diameter and material for water supply pipes to prevent freezing of liquids.
3. Install water supply lines below the ground freezing level (usually from 60 to 140 cm, depending on the region and average winter temperatures).

To effectively treat and prevent wastewater from freezing, a septic tank or a cascade of septic tanks is installed at a self-service car wash in winter. The purification process in these systems is accompanied by bacterial activity and heat removal, so the wastewater does not freeze during the constant operation of the complex.

Selection of materials and technologies for the construction of the complex

There are no specially designed building materials on the market for use in winter or summer. But there are two important criteria they must meet: quality and compliance with technological requirements during construction and installation.

To ensure the efficient operation of a self-service car wash in winter, Wash Service specialists take the following steps:

1. Underfloor heating is installed at each complex.
2. A floor heating system is installed at each car wash station to provide heat transfer and circulation to heat the floor at low temperatures. The process involves the installation of pipes of a certain diameter, extruded foam between the rough and finish layers of concrete, a heat-insulating screen and reinforcing mesh to strengthen the concrete.
3. They equip the surface of the underfloor heating to prevent ice formation at low temperatures, prevent wastewater from freezing and facilitate its unimpeded discharge into septic tanks or sewers.

Selection of high-quality concrete for the construction of the complex

To ensure the strength of all structures and the efficient operation of the complex, it is important to choose high-quality concrete and follow the correct pouring technology. Compliance with these requirements is the key to structural reliability.

To achieve high quality rough and finish concrete layers at a self-service car wash in winter, we recommend the following steps:

1. Create a sand and crushed stone cushion using crushed stone with a fraction of 20 to 40 mm and a thickness of 15-20 cm.
2. Use high-quality concrete, such as grades M 250-M 300.
3. Install reinforcing mesh with a diameter of 10-12 mm to strengthen and bind all layers of concrete.
4. Deliver concrete to the site and pour it using mixers from the manufacturer.
5. Pour the concrete in compliance with the beacons and compact it thoroughly.

Providing comfortable conditions for staff

To create optimal working conditions for the staff at the self-service car wash in winter, Wash Service insulates all administrative and technical buildings. Heating systems are installed inside the premises.

Our specialists train our staff in a special center where they learn to monitor the equipment and solve any problems that may arise as a result of freezing or failure of self-service car washes. In addition, we have created a special unit that is ready to go to any facility we build and maintain and promptly fix any problems.

Installation of the “ANTI-FROST” system

The ANTI-FROST system, equipped with temperature sensors, is designed to automatically turn on water circulation in low and high pressure systems when the temperature drops to +4 °C. It ensures uninterrupted operation of the complex in winter when temperatures drop to -15-20 °C.

The composition of the ANTI-FROST system includes:

1. Circulation pump.
2. A set of valves.
3. Guns designed to work in winter conditions.

Supply of high-quality car care products for efficient operation of self-service car wash in winter

For a self-service car wash to operate smoothly in winter, it is important to choose high-quality car care products that retain their properties at low temperatures. High-quality car care products should perform the following functions:

1. Effectively prepares the surface of cars for further washing, dissolving various contaminants.
2. To remove residual contaminants from the surface of car paintwork that may remain after pretreatment.
3. To protect the car body from the negative effects of external aggressive factors and give them an attractive appearance.

If you would like to learn more about the operation of a self-service car wash in winter, please contact us using the contact information provided in the “Contacts“. Our experts are ready to provide you with all the necessary information and advice on the construction and selection of equipment to ensure the continued operation of self-service car washes in winter.